A Highly Robust and Conducting Ultramicroporous 3D Fe(II)-Based Metal-Organic Framework for Efficient Energy Storage.

Exploitation of metal-organic framework (MOF) materials as active electrodes for energy storage or conversion is reasonably challenging owing to their poor robustness against various acidic/basic conditions and conventionally low electric conductivity. Keeping this in perspective, herein, a 3D ultramicroporous triazolate Fe-MOF (abbreviated as Fe-MET) is judiciously employed using cheap and commercially available starting materials. Fe-MET possesses ultra-stability against various chemical environments (pH-1 to pH-14 with varied organic solvents) and is highly electrically conductive (σ = 0.19 S m-1) in one fell swoop. By taking advantage of the properties mentioned above, Fe-MET electrodes give prominence to electrochemical capacitor (EC) performance by delivering an astounding gravimetric (304 F g-1) and areal (181 mF cm-2) capacitance at 0.5 A g-1 current density with exceptionally high cycling stability. Implementation of Fe-MET as an exclusive (by not using any conductive additives) EC electrode in solid-state energy storage devices outperforms most of the reported MOF-based EC materials and even surpasses certain porous carbon and graphene materials, showcasing superior capabilities and great promise compared to various other alternatives as energy storage materials.

Co-containing metal-organic framework for high-performance asymmetric supercapacitors with functionalized reduced graphene oxide.

Nowadays, supercapacitors are the most coveted eco-friendly and sustainable next-generation energy storage devices. In this regard, developing supercapacitors with high energy density and power density has always been a challenge for researchers. Herein, we have exploited an electroactive Co-containing metal-organic framework (Co-MOF) using cheap and commercially available starting materials under refluxing conditions and explored its energy storage properties in three- and two-electrode methods. The Co-MOF exhibited a specific capacitance of 425 F g-1 at 2 A g-1, maintaining a capacitance of ∼78% over 2200 successive charge-discharge cycles in a three-electrode system. The two-electrode asymmetric supercapacitor (ASC) using Co-MOF as the working electrode and as-synthesized p-phenylenediamine (PPD)-functionalized reduced graphene oxide (PPD-rGO) as the counter electrode divulged a specific capacitance of 72.5 F g-1 at 2 A g-1 current density with ∼70% capacitive retention after 2200 successive charge-discharge cycles over a broad potential window of 0-1.6 V. Moreover, the ASC demonstrated a maximum power density of 11.9 kW kg-1 at 10 A g-1 and a maximum energy density of 25.8 W h kg-1 at 2 A g-1 current density. Owing to the stable electrochemical redox (Co2+/Co3+)-mediated pseudocapacitive behavior of the Co-MOF and the high surface area and electrical conductivity of in situ generated PPD-intercalated rGO, the fabricated ASC unveiled high-performance supercapacitive behaviors. To investigate the practical applicability of this material, solid-state (ASC) devices were fabricated by employing the Co-MOF as the positive electrode and PPD-rGO as the negative electrode in a KOH-based gel electrolyte, which could power a commercially available light-emitting diode bulb (∼1.8 V) for several seconds. Therefore, the elucidated high electrochemical energy storage performance of the prepared Co-MOF makes it a very promising electrode material for supercapacitors.

Highly Robust Metal-Organic Framework for Efficiently Catalyzing Knoevenagel Condensation and the Strecker Reaction under Solvent-Free Conditions.

Metal-organic frameworks (MOFs) have been recognized as one of the most promising porous materials and offer great opportunities for the rational design of new catalytic solids having great structural diversity and functional tunability. Despite numerous inherent merits, their chemical environment instability limits their practical usage and demands further exploration. Herein, by employing the mixed-ligand approach, we have designed and developed a robust 3D Co-MOF, [Co2(µ2-O)(TDC)2(L)(H2O)2]·2DMF (H2TDC = 2,5-thiophenedicarboxylic acid, L = 3,3'-azobispyridine), IITKGP-50 (IITKGP stands for the Indian Institute of Technology Kharagpur), which exhibited excellent framework robustness not only in water but also in a wide range of aqueous pH solutions (pH = 2-12). Taking advantage of superior framework robustness and the presence of high-density open metal sites, IITKGP-50 was further explored in catalyzing the two-component Knoevenagel condensation reaction and three-component Strecker reactions. Moreover, to verify the size selectivity of IITKGP-50, smaller to bulkier substrates in comparison with the MOF's pore cavity (8.1 × 5.6 Å2) were employed, in which relatively lesser conversions for the sterically bulkier aldehyde derivatives confirmed that the catalytic cycle occurs inside the pore cavity. The easy scalability, lower catalyst loading compared to that of benchmark MOFs, magnificent conversion rate over a wide range of substrates, and excellent recyclability without significant performance loss made IITKGP-50 a promising heterogeneous catalyst candidate.

A Water-Stable Cationic SIFSIX MOF for Luminescent Probing of Cr2 O7 2- via Single-Crystal to Single-Crystal Transformation.

The sensing and monitoring of toxic oxo-anion contaminants in water are of significant importance to biological and environmental systems. A rare hydro-stable SIFSIX metal-organic framework, SiF6 @MOF-1, {[Cu(L)2 (H2 O)2 ]·(SiF6 )(H2 O)}n , with exchangeable SiF6 2- anion in its pore is strategically designed and synthesized, exhibiting selective detection of toxic Cr2 O7 2- oxo-anion in an aqueous medium having high sensitivity, selectivity, and recyclability through fluorescence quenching phenomena. More importantly, the recognition and ion exchange mechanism is unveiled through the rarely explored single-crystal-to-single crystal (SC-SC) fashion with well-resolved structures. A thorough SC-SC study with interfering anions (Cl- , F- , I- , NO3 - , HCO3 - , SO4 2- , SCN- , IO3 - ) revealed no such transformations to take place, as per line with quenching studies. Density functional theory calculations revealed that despite a lesser binding affinity, Cr2 O7 2- shows strong orbital mixing and large driving forces for electron transfer than SiF6 2- , and thus enlightens the fluorescence quenching mechanism. This work inaugurates the usage of a SIFSIX MOF toward sensing application domain under aqueous medium where hydrolytic stability is a prime concern for their plausible implementation as sensor materials.

Dynamic Hydrogen-Bonded Zinc Adeninate Framework (ZAF) for Immobilization of Catalytic DNA.

Effective immobilization and delivery of genetic materials is at the forefront of biological and medical research directed toward tackling scientific challenges such as gene therapy and cancer treatment. Herein we present a biologically inspired hydrogen-bonded zinc adeninate framework (ZAF) consisting of zinc adeninate macrocycles that self-assemble into a 3D framework through adenine-adenine interactions. ZAF can efficiently immobilize DNAzyme with full protection against enzyme degradation and physiological conditions until it is successfully delivered into the nucleus. As compared to zeolitic imidazolate frameworks (ZIFs), ZAFs are twofold more biocompatible with a significant loading efficiency of 96 %. Overall, our design paves the way for expanding functional hydrogen-bonding-based systems as potential platforms for the loading and delivery of biologics.

DNA-Mimicking Metal-Organic Frameworks with Accessible Adenine Faces for Complementary Base Pairing.

Biologically derived metal-organic frameworks (Bio-MOFs) are significant, as they can be used in cutting-edge biomedical applications such as targeted gene delivery. Herein, adenine (Ade) and unnatural amino acids coordinate with Zn2+ to produce biocompatible frameworks, KBM-1 and KBM-2, with extremely defined porous channels. They feature an accessible Watson-Crick Ade face that is available for further hydrogen bonding and can load single-stranded DNA (ssDNA) with 13 and 41% efficiency for KBM-1 and KBM-2, respectively. Treatment of these frameworks with thymine (Thy), as a competitive guest for base pairing with the Ade open sites, led to more than 50% reduction of ssDNA loading. Moreover, KBM-2 loaded Thy-rich ssDNA more efficiently than Thy-free ssDNA. These findings support the role of the Thy-Ade base pairing in promoting ssDNA loading. Furthermore, theoretical calculations using the self-consistent charge density functional tight-binding (SCC-DFTB) method verified the role of hydrogen bonding and van der Waals type interactions in this host-guest interface. KBM-1 and KBM-2 can protect ssDNA from enzymatic degradation and release it at acidic pH. Most importantly, these biocompatible frameworks can efficiently deliver genetic cargo with retained activity to the cell nucleus. We envisage that this class of Bio-MOFs can find immediate applicability as biomimics for sensing, stabilizing, and delivering genetic materials.

Molecular recognition and adsorptive separation of m-xylene by trianglimine crystals.

The separation of xylene isomers is one of the most challenging tasks in the petrochemical industry. Herein, we developed an efficient adsorptive molecular sieving strategy using crystalline trianglimine macrocycle (1) to separate the elusive m-xylene isomer from an equimolar xylenes mixture with over 91% purity. The selectivity is attributed to the capture of the preferred guest with size/shape selectivity and C-H⋯π interactions. Moreover, the trianglimine crystals are readily recyclable due to the reversible transformation between the guest-free and guest-loaded structures.

Coordination-based self-assembled capsules (SACs) for protein, CRISPR-Cas9, DNA and RNA delivery.

Biologics, such as functional proteins and nucleic acids, have recently dominated the drug market and comprise seven out of the top 10 best-selling drugs. Biologics are usually polar, heat sensitive, membrane impermeable and subject to enzymatic degradation and thus require systemic routes of administration and delivery. Coordination-based delivery vehicles, which include nanosized extended metal-organic frameworks (nMOFs) and discrete coordination cages, have gained a lot of attention because of their remarkable biocompatibility, in vivo stability, on-demand biodegradability, high encapsulation efficiency, easy surface modification and moderate synthetic conditions. Consequently, these systems have been extensively utilized as carriers of biomacromolecules for biomedical applications. This review summarizes the recent applications of nMOFs and coordination cages for protein, CRISPR-Cas9, DNA and RNA delivery. We also highlight the progress and challenges of coordination-based platforms as a promising approach towards clinical biomacromolecule delivery and discuss integral future research directions and applications.

Porous Anionic Co(II) Metal-Organic Framework, with a High Density of Amino Groups, as a Superior Luminescent Sensor for Turn-on Al(III) Detection.

Accumulation of high concentrations of Al(III) in body has a direct impact on health and therefore, the trace detection of Al(III) has been a matter for substantial concern. An anionic metal organic framework ({[Me2 NH2 ]0.5 [Co(DATRz)0.5 (NH2 BDC)] ⋅ xG}n ; 1; HDATRz=3,5-diamino-1,2,4-triazole, H2 NH2 -BDC=2-amino-1,4-benzenedicarboxylic acid, G=guest molecule) composed of two types of secondary building units (SBU) and channels of varying sizes was synthesized by employing a rational design mixed ligand synthesis approach. Free -NH2 groups on both the ligands are immobilized onto the pore surface of the MOF which acts as a superior luminescent sensor for turn-on Al(III) detection. Furthermore, the large channels could allow the counter-ions to pass through and get exchanged to selectively detect Al(III) in presence of other seventeen metal ions with magnificent luminescence enhancement. The observed limit of detection is as low as 17.5 ppb, which is the lowest among the MOF-based sensors achieved so far. To make this detection approach simple, portable and economic, we demonstrate MOF filter paper test for real time naked eye observation.

Adsorptive Molecular Sieving of Styrene over Ethylbenzene by Trianglimine Crystals.

The separation of styrene (ST) and ethylbenzene (EB) mixtures is of great importance in the petrochemical and plastics industries. Current technology employs multiple cycles of energy-intensive distillation due to the very close boiling points of ST and EB. Here, we show that the molecular sieving properties of easily scalable and stable trianglimine crystals offer ultrahigh selectivity (99%) for styrene separation. The unique molecular sieving properties of trianglimine crystals are corroborated by DFT calculations, suggesting that the incorporation of the nonplanar EB requires a significant deformation of the macrocyclic cavity whereas the planar ST can be easily accommodated in the cavity.

From Capsule to Helix: Guest-Induced Superstructures of Chiral Macrocycle Crystals.

Predicting, controlling, understanding, and elucidating the phase transition from gel to crystal are highly important for the development of various functional materials with macroscopic properties. Here, we show a detailed and systematic description of the self-assembly process of an enantiopure trianglimine macrocyclic host from gel to single crystals. This proceeds via an unprecedented formation of capsule-like or right-handed helix superstructures as metastable products, depending on the nature of the guest molecule. Mesitylene promotes the formation of capsule-like superstructures, whereas toluene results in the formation of helices as intermediates during the course of crystallization. Single-crystal results demonstrate that the crystals obtained via the direct self-assembly from the gel phase are different from the crystals obtained from the stepwise assembly of the intermediate superstructures. Hence, investigating the phase-transition superstructures that self-assemble through the process of crystallization can unravel new molecular ordering with unexplored host-guest interactions. Such understanding will provide further tools to control hierarchical assemblies at the molecular level and consequently design or dictate the properties of evolved materials.

Immobilization of a Polar Sulfone Moiety onto the Pore Surface of a Humid-Stable MOF for Highly Efficient CO2 Separation under Dry and Wet Environments through Direct CO2-Sulfone Interactions.

The stability of microporous metal-organic frameworks (MOFs) in moist environments must be taken into consideration for their practical implementations, which has been largely ignored thus far. Herein, we synthesized a new moisture-stable Zn-MOF, {[Zn2(SDB)2(L)2]·2DMA}n, IITKGP-12, by utilizing a bent organic linker 4,4'-sulfonyldibenzoic acid (H2SDB) containing a polar sulfone group (-SO2) and a N, N-donor spacer (L) with a Brunauer-Emmett-Teller surface area of 216 m2 g-1. This material displays greater CO2 adsorption capacity over N2 and CH4 with high IAST selectivity, which is also validated by breakthrough experiments with longer breakthrough times for CO2. Most importantly, the separation performance is largely unaffected in the presence of moisture of simulated flue gas stream. Temperature-programmed desorption (TPD) analysis shows the ease of the regeneration process, and the performance was verified for multiple cycles. In order to understand the structure-function relationship at the atomistic level, grand canonical Monte Carlo (GCMC) calculation was performed, indicating that the primary binding site for CO2 is between the sulfone moieties in IITKGP-12. CO2 is attracted to the bonded structure (V-shape) of the sulfone moieties in a perpendicular fashion, where CCO2 is aligned with S, and the CO2 axis bisects the SO2 axis. Thus, the strategic approach to immobilize the polar sulfone moiety with a high number of inherent stronger M-N coordination and the absence of coordination unsaturation made this MOF potential toward practical CO2 separation applications.

A "Thermodynamically Stable" 2D Nickel Metal-Organic Framework over a Wide pH Range with Scalable Preparation for Efficient C2 s over C1 Hydrocarbon Separations.

The design and construction of "thermodynamically stable" metal-organic frameworks (MOFs) that can survive in liquid water, boiling water, and acidic/basic solutions over a wide pH range is highly desirable for many practical applications, especially adsorption-based gas separations with obvious scalable preparations. Herein, a new thermodynamically stable Ni MOF, {[Ni(L)(1,4-NDC)(H2 O)2 ]}n (IITKGP-20; L=4,4'-azobispyridine; 1,4-NDC=1,4-naphthalene dicarboxylic acid; IITKGP stands for the Indian Institute of Technology Kharagpur), has been designed that displays moderate porosity with a BET surface area of 218 m2 g-1 and micropores along the [10-1] direction. As an alternative to a cost-intensive, cryogenic, high-pressure distillation process for the separation of hydrocarbons, MOFs have recently shown promise for such separations. Thus, towards an application standpoint, this MOF exhibits a higher uptake of C2 hydrocarbons over that of C1 hydrocarbon under ambient conditions, with one of the highest selectivities based on the ideal adsorbed solution theory (IAST) method. A combination of two strategies (the presence of stronger metal-N coordination of the spacer and the hydrophobicity of the aromatic moiety of the organic ligand) possibly makes the framework highly robust, even stable in boiling water and over a wide range of pH 2-10, and represents the first example of a thermodynamically stable MOF displaying a 2D structural network. Moreover, this material is easily scalable by heating the reaction mixture at reflux overnight. Because such separations are performed in the presence of water vapor and acidic gases, there is a great need to explore thermodynamically stable MOFs that retain not only structural integrity, but also the porosity of the frameworks.

Two Closely Related Zn(II)-MOFs for Their Large Difference in CO2 Uptake Capacities and Selective CO2 Sorption.

Two azo functionalized Zn(II)-based MOFs, {[Zn(SDB)(3,3'-L)0.5]·xG}n, IITKGP-13A, and {[Zn2(SDB)2(4,4'-L)]·xG}n, IITKGP-13B (IITKGP stands for Indian Institute of Technology Kharagpur), have been constructed through the self-assembly of isomeric N,N'-donor spacers (3,3'-L = 3,3'-azobispyridine and 4,4'-L = 4,4'-azobispyridine) with organic ligand 4,4'-sulfonyldibenzoic acid (SDBH2) and Zn(NO3)2·6H2O (G represents disordered solvent molecules). Single-crystal X-ray diffraction studies reveal the 2D structure with sql topology for both MOFs. However, the subtle change in positions of coordinating N atoms of spacers makes IITKGP-13A noninterpenetrated, while IITKGP-13B bears a 2-fold interpenetrated structure. IITKGP-13A exhibits higher uptake of CO2 over CH4 and N2 with high IAST selectivities for mixed CO2/CH4 (50:50, biogas) and CO2/N2 (15:85, flue gas) gas systems. In contrast, IITKGP-13B takes up very low amount of CO2 gas (0.4 mmol g-1) compared to IITKGP-13A (1.65 mmol g-1) at 295 K. Density functional theory (DFT)-based electronic structure calculations have been performed to explain the origin of the large differences in CO2 uptake capacity between the two MOFs at the atomistic level. The results show that the value of the change in enthalpy (ΔH) at 298 K temperature and 1 bar pressure for the CO2 adsorption is more negative in IITKGP-13A as compared to that in IITKGP-13B, thus indicating that CO2 molecules are more favored to get adsorbed in IITKGP-13A than in IITKGP-13B. The computed values for the Gibbs' free energy change (ΔG) for the CO2 adsorption are positive for both of the MOFs, but a higher value is observed for the IITKGP-13B. The noncovalent types of interactions are the main contribution toward the attractive energies between the host MOF frameworks and guest CO2 molecules, which has been studied with the help of energy decomposition analysis (EDA).

A Phosphate-Based Silver-Bipyridine 1D Coordination Polymer with Crystallized Phosphoric Acid as Superprotonic Conductor.

Phosphate-based silver-bipyridine (Ag-bpy) 1D coordination polymer {[{Ag(4,4'-bpy)}2 {Ag(4,4'-bpy)(H2 PO4 )}]⋅2 H2 PO4 ⋅H3 PO4 ⋅5 H2 O}n (1) with free phosphoric acid (H3 PO4 ), its conjugate base (H2 PO4 - ) and water molecules in its lattice was synthesized by room-temperature crystallization and the hydrothermal method. An XRD study showed that coordinated H2 PO4 - , lattice H2 PO4 - anions, free H3 PO4 and lattice water molecules are interconnected by H-bonding interactions, forming an infinitely extended 2D H-bonded network that facilitates proton transfer. This material exhibits a high proton conductivity of 3.3×10-3  S cm-1 at 80 °C and 95 % relative humidity (RH). Furthermore, synthesis of this material from commercially available starting materials in water can be easily scaled up, and it is highly stable under extreme conditions of conductivity measurements. This report inaugurates the usage and design principle of proton-conducting frameworks based on crystallized phosphoric acid and phosphate.

A Microporous Co-MOF for Highly Selective CO2 Sorption in High Loadings Involving Aryl C-H···O═C═O Interactions: Combined Simulation and Breakthrough Studies.

In the context of porous crystalline materials toward CO2 separation and capture, a new 2-fold interpenetrated 3D microporous Co-MOF, IITKGP-11 (IITKGP denotes Indian Institute of Technology Kharagpur), has been synthesized consisting of a 1D channel of ∼3.6 × 5.0 Å2 along the [101] direction with a cavity volume of 35.20%. This microporous framework with a BET surface area of 253 m2g-1 shows higher uptake of CO2 (under 1 bar, 3.35 and 2.70 mmol g-1 at 273 and 295 K, respectively), with high separation selectivities for CO2/N2 and CO2/CH4 gas mixtures under ambient conditions as estimated through IAST calculation. Moreover, real time dynamic breakthrough studies reveal the high adsorption selectivity toward CO2 for these binary mixed gases at 295 K and 1 bar. Besides high gas separation selectivity, capacity considerations in mixed gas phases are also important to check the performance of a given adsorbent. CO2 loading amounts in mixed gas phases are quite high as predicted through IAST calculation and experimentally determined from dynamic breakthrough studies. In order to get insight into the phenomena, GCMC simulation was performed demonstrating that the CO2 molecules are electrostatically trapped via interactions between oxygen on CO2 and hydrogen on pyridyl moieties of the spacers.

Three Co(II) Metal-Organic Frameworks with Diverse Architectures for Selective Gas Sorption and Magnetic Studies.

Three Co(II) metal-organic frameworks, namely, {[Co2(L)2(OBA)2(H2O)4]· xG} n (1), {[Co(L)0.5(OBA)]· xG} n (2), and {[Co2(L)2(OBA)2(H2O)]·DMA· xG} n (3) [where L = 2,5-bis(3-pyridyl)-3,4-diaza-2,4-hexadiene, H2OBA = 4,4'-oxybisbenzoic acid, DMF = dimethylformamide, DMA = dimethylacetamide, and G denotes disordered guest molecules], have been synthesized under diverse reaction conditions through self-assembly of a bent dicarboxylate and a linear spacer with a Co(II) ion. While 1 is crystallized at room temperature in DMF to form a 2D layer structure, 2 is formed by the assembly of similar components under solvothermal conditions with a 3D network structure. On the other hand, changing the solvent to DMA, 3 could be crystallized at room temperature with a 3D architecture. Out of the three, activated sample 2 was found to be permanently microporous in nature, with a BET surface area of 385 m2/g, and exhibited moderately high uptake capacity for C2H2 and CO2 while taking up much less CH4 and N2 at ambient conditions. As a result, high ideal adsorbed solution theory (IAST) separation selectivities are obtained for CO2/N2 (15:85), CO2/CH4 (50:50), and C2H2/CH4 (50:50) gas mixtures, making 2 a potential candidate for those important gas separations at ambient conditions. Moreover, the magnetic properties of 1-3 were studied. 1 and 2 show antiferromagnetic interaction between the Co(II) centers, whereas 3 displays ferromagnetic behavior arising from a counter-complementary effect between two types of links among Co(II) centers in 3.

How To Achieve High Regioselectivity in Barrier-less Nucleophilic Addition to p-Benzynes Generated via Bergman Cyclization of Unsymmetrical Cyclic Azaenediyne?

Inducing high regioselectivity in nucleophilic addition to p-benzynes, first reported by Perrin and O'Connor et al. ( J. Am. Chem. Soc. 2007 , 129 , 4795 - 4799 ) has been a challenge as the reaction involves a very fast barrier-less addition of nucleophile. On the other hand, achieving a high degree of regioselectivity is important as that will make the reaction synthetically useful. Recently, a study has been reported from our group ( J. Org. Chem. 2018 , 83 , 7730 - 7740 ), whereby it was shown that nucleophilic addition to p-benzynes derived from unsymmetrical N-substituted cyclic enediynes proceeds with low extent of selectivity by incorporation of groups with divergent electronic characters. Herein, we report that excellent regioselectivity (>99%) can be achieved keeping an ortho alkoxy group in unsymmetrical 1,2-dialkynylbenzene in the form of a cyclic enediyne in quantitative yields. High regioselectivity (∼84%) is also shown by pyridine based enediynes where the pyridine nitrogen is in a 1,3-relationship with the impending radical center, expanding the synthetic scope of this nucleophilic addition. The regioselectivity can be explained in terms of computed electrostatic potentials which are substantially different around two radical centers arising due to the "ortho effect" (conformational alignment of lone pair of the ortho alkoxy oxygen or the nitrogen in pyridine systems).

Metal-Organic Frameworks and Other Crystalline Materials for Ultrahigh Superprotonic Conductivities of 10-2 †S cm-1 or Higher.

Proton-conducting materials in the solid state have received immense attention for their role as electrolytes in proton-exchange membrane fuel cells. Recently, crystalline materials-metal-organic frameworks (MOFs), hydrogen-bonded organic frameworks (HOFs), covalent organic frameworks (COFs), polyoxometalates (POMs), and porous organic crystals-have become an exciting research topic in the field of proton-conducting materials. For a better electrolyte, a high proton conductivity on the order of 10-2  S cm-1 or higher is preferred as efficient proton transport between the electrodes is ultimately necessary. With an emphasis on design principles, this Concept will focus on MOFs and other crystalline solid-based proton-conducting platforms that exhibit "ultrahigh superprotonic" conductivities with values in excess of 10-2  S cm-1 . While only a handful of MOFs exhibit such an ultrahigh conductivity, this quality in other systems is even rarer. In addition to interpreting the structural-functional correlation by taking advantage of their crystalline nature, we address the challenges and promising directions for future research.

Metalo Hydrogen-Bonded Organic Frameworks (MHOFs) as New Class of Crystalline Materials for Protonic Conduction.

Recently, proton conduction has been a thread of high potential owing to its wide applications in fuel-cell technology. In the search for a new class of crystalline materials for protonic conductors, three metalo hydrogen-bonded organic frameworks (MHOFs) based on [Ni(Imdz)6 ]2+ and arene disulfonates (MHOF1 and MHOF2) or dicarboxylate (MHOF3) have been reported (Imdz=imidazole). The presence of an ionic backbone with charge-assisted H-bonds, coupled with amphiprotic imidazoles made these MHOFs protonic conductors, exhibiting conduction values of 0.75×10-3 , 3.5×10-4 and 0.97×10-3  S cm-1 , respectively, at 80 °C and 98 % relative humidity, which are comparable to other crystalline metal-organic framework, coordination polymer, polyoxometalate, covalent organic framework, and hydrogen-bonded organic framework materials. This report initiates the usage of MHOF materials as a new class of solid-state proton conductors.